ABA-flow^® can also be connected directly to a building automation system (BAS). This then adopts the BAS flushing parameters specific to the building. If this fails, the ABA-flow control system with its internally stored flushing schedules is automatically activated and ensures drinking water quality is maintained.

An internal data memory read-out provides evidence of flawless system operation. The flushing parameters are factory preconfigured and can be customised at any time according to needs using the system software provided. The single-section gunmetal strands are encased in PU foam for insulation and are suitable for space-saving installation, whether pre-wall, flush-mounted or surface-mounted. Depending on the existing structural characteristics of the building, it is also possible to install the control and flushing units of a system up to 100 metres apart. ABA-flow^® flushing stations are supplied ready to plug in with 230 V mains voltage. The flush valves are normally closed. Each strand achieves a flushing volume of 4 litres/minute. The open outlets have sensor-monitored odour traps. The cost-effective new flushing unit BAS-Control is a stand-alone solution for direct control via a building automation system.